Composite Materials: Fatigue and Fracture Book

	Overview
	Experimental Development of a Mixed-Mode Fatigue Delamination Criterion	3
	Mode I and Mode II Delamination Growth of Interlayer Toughened Carbon/Epoxy (T800H/3900-2) Composite System	19
	Interlaminar Fracture Toughness of Glass Fiber Laminates Additionally Reinforced with Carbon Bead	38
	Delamination of Carbon/Epoxy Laminates Under Cyclic Mode II Loading	61
	Mode III Delamination Using a Split Cantilever Beam	85
	Mixed Mode Interlaminar Fracture Toughness of Unidirectional Glass/Epoxy Composite	100
	Improvement of Delamination Resistance with Carbon Nonwoven Mat Interleaves	124
	Mode I and Mode II Fracture Toughness Measured Between Differently Oriented Plies in Graphite/Epoxy Composites	132
	Prediction of Energy Release Rate for Edge Delamination Using a Crack Tip Element Approach	155
	Stress and Energy Based Fracture Conditions for Fiber-Wise Splitting in Composites	176
	Modeling of Accumulated Damage and Failure of Multidirectional Composite Plates Subjected to In-Plane Loads	186
	Shear Deformation Analysis of the Energy Release Rate of Transverse Cracking in Laminated Composites	215
	A Random-Damage Finite Element for Modeling Failure in Advanced Composite Materials	232
	Stacking Sequence Effects and Delamination Growth in Graphite/Epoxy Laminates Under Compression-Dominated Fatigue Loading	249
	The Effect of Graphite Fiber Properties on Microcracking Due to Thermal Cycling of Epoxy-Cyanate Matrix Laminates	268
	Marine Environmental Effects of Polymer Matrix Composites	283
	Observations of the Load Redistribution in Polymeric Composite Laminates Under Tension-Tension Fatigue Loading	304
	A New Test for Compression Testing of Impregnated Tows	317
	Non-Penetrating Impact Behavior of CFRP at Low and Intermediate Velocities	333
	Post-Impact Fatigue Response of Stitched Composites	351
	Impact and Fatigue Resistance of a [actual symbol not reproducible] 3-D Braided Carbon Epoxy Composite	368
	Influence of Impact Parameters on the Response of Laminated Composite Plates	389
	Damage Tolerance and Arrest Characteristics of Pressurized Graphite/Epoxy Tape Cylinders	407
	Fatigue and Fracture of the 767 Graphite Torsion Spring	427
	Fracture of Glass-Epoxy Laminates Under Torsion and Combined Tension-Torsion Load	440
	Influence of Realistic Ply-Drop Geometries on Interlaminar Stresses in Tapered Laminates	467
	Delamination in Composites with Terminating Internal Plies Under Tension Fatigue Loading	486
	Indexes	509