Sold Out
Book Categories |
Introduction to CATIA 5 |
Lesson 1 |
Sketcher Work Bench |
Introduction to the Sketcher Work Bench |
Sketcher Work Bench Tool Bars |
Operation, Profile, Constraints and and Tools tool bars |
Steps to Creating a Simple Part Using the Sketcher Work Bench |
Specify a Working Plane; customize the Grid; create geometry using the Profile tools; Starting point; create lines; breaking a line; deleting lines; using the Trim tool; modify using Corner and Chamfer; Anchor and Constrain the Profile; modify constraints; over-constraining the Profile; exiting the Sketcher Work Bench; extrude the Profile using the Pad tool; saving the file and exiting CATIA. |
Summary |
Review |
Practice Exercises |
Lesson 2 |
Part Design Work Bench |
Introduction to the Part Design Work Bench |
Part Design Work Bench Tool Bars |
Sketcher, Transformation Features, Dress-Up Features, Annotations, Sketch-Based Features, Constraints Features, and Surface-Based Features tool bars |
Steps to Extruding a Part Using the Part Design Work Bench |
Open the saved file; extrude the Sketcher Profile using the Pad tool; create a Fillet and Chamfer on the extruded part; add holes; create a pattern of holes; modify the width; translate and rotate the finished part; create a symmetrical part from the extruded part; mirror and scale the finished part; constrain the part in the Part Design Workbench; add material to the finished part; manage and customize the Specification Tree, review the Design Process using the Specification Tree; save and exit. |
Summary |
Lesson Review |
Practice Exercises |
Lesson 3 |
Drafting Work Bench |
Introduction to Creating Sheets and Views using the Drafting |
Work Bench |
Drafting Work Bench Toolbars |
Select, Dress Up, Drawing, Views, Annotations and Graphical Properties tool bars |
Steps to Creating Sheets and Views using the Drafting Work Bench |
Open the saved part; Drafting Work Bench layout; customize the default values; create a new sheet and a new view; modify an existing view; create a detail view; create a section view; create an auxiliary view ; save new drawing and print sheets. |
Summary |
Chapter Review |
Practice Exercises |
Lesson 4 |
Drafting Work Bench |
Introduction to Creating Text and Dimensions using the Drafting |
Work Bench |
Drafting Work Bench Tool Bars |
Text Properties, Dimension Properties, Select Tool, Geometry Creation, Generation, Dimension, Dress Up, Drawing, Geometry Edition, Annotation, Graphical Properties, and Style tool bars |
Adding Text and Dimensions to Drawings using the Drafting |
Work Bench |
Open the drawing; Drafting Work Bench layout; customize the default values; create and modify text, leaders, and dimensions; create a border/title block using the Geometry Creation tool bar; insert bill of materials and picture files to title block; save and print drawing |
Summary |
Chapter Review |
Practice Exercises |
Lesson 5 |
Complex Parts & Multiple Sketch Parts |
Creating Complex and Multiple Sketch Parts using the Sketcher |
and Part Design Work Benches |
Tools used for Complex and Multiple Sketch Parts |
Steps to Creating Complex and Multiple Sketch Parts |
Create the Swivel using multiple sketches; create the top U-Joint using multiple sketches; create the bottom U-Joint using Boolean Geometry |
Summary |
Chapter Review |
Practice Exercises |
Lesson 6 |
Assembly Design Work Bench |
Introduction to Creating an Assembly using the Assembly Design |
Work Bench |
Assembly Design Work Bench Tool Bars |
Move, Product Structure, Measure, Constraints, Annotation, Assembly Features, and Weld Planner tool bars |
Steps to Creating an Assembly using the Assembly Design Work Bench |
Enter the Assembly Work Bench; insert components into the Assembly Work Bench; move components using the Manipulation tool and using the compass; assemble existing components; modify a component; create a bill of materials; analyze/modify assembly constraints; clash detection; measuring tools; assembly dependencies; mechanical structure; add annotation; explode the assembly; save a specific view. |
Summary |
Chapter Review |
Practice Exercises |
Lesson 7 |
Generative Shape Design Work Bench |
Introduction to Creating Wireframe and Surface Geometry using |
the Generative Shape Design Work Bench |
Generative Shape Design Work Bench Tool Bars |
Wire Frame, Operations, Surfaces, Replication, and Law tool bars |
Steps to Creating a Wireframe Part using the Generative Shape |
Design Work Bench |
Create a local axis system; create points; create a line using the point-point method; create a line using the point-direction method; create a line using the same point-direction method; complete the wireframe; create planes and corners; use the Split tool; add an elliptical wireframe using the Sketcher Work Bench; apply a surface to the wireframe using the Fill tool; create a fillet between two surfaces; create an elliptical cutout using the Split tool; create surface thickness using the Thick Surface tool; create a helix. |
Summary |
Chapter Review |
Practice Exercises |
Lesson 8 |
Generative Shape Design Work Bench |
Create Wireframe and Surface Geometry using the Sweep Tool |
Generative Shape Design Work Bench Tool Bars |
Surfaces tool bar |
Steps to Creating a Part using the Sweep Tool |
Create the profile and the guided curve in the Sketcher Work Bench; join the guided curve entities using the Join tool; create surface using the Sweep tool; create trimmed profile for the Top Flange using Sketcher Work Bench; extrude the flange trim sketch using the Extrude tool; trim surfaces using the Split tool; create surface thickness using the Offset tool; close surfaces using the Fill tool; join surfaces using the Join tool; close surfaces; use the Close Surface tool; add an angle using the Plane and Pocket tools; dress up the extrusion solid using the Fillet tool; finishing touch - apply material. |
Summary |
Chapter Review |
Practice Exercises |
Lesson 9 |
DMU Navigator |
Introduction to the DMU Navigator Work Bench using the Fly Mode |
DMU Navigator Work Bench Tool Bars |
Navigator, Generic Animation, Data Navigation, Viewing, View, and Move tool bars |
Steps to Downloading the SuperMileage.zip file |
Download the file from the web; Unzip the file to your working directory. |
Steps to Navigating the Assembly using the DMU Navigator |
Work Bench |
Enter DMU Navigator Work Bench; insert components into the DMU Navigator Work Bench; navigate through the assembly using the Fly mode; create an annotated view; create 3D text; create a Scene; record and replay a Fly Thru. |
Summary |
Chapter Review |
Practice Exercises |
Lesson 10 |
Rendering Work Bench |
Introduction to the Rendering Work Bench |
Rendering Work Bench Tool Bars |
Scene Editor, Animation, and Render tool bars |
Bringing the Assembly into the Rendering Work Bench |
Enter Rendering Work Bench; Load models into Rendering Work Bench; create an environment; define a light; add images to the walls; create a camera and a shooting; animate the rendering. |
Summary |
Chapter Review |
Practice Exercises |
Lesson 11 |
Parametric Design |
Introduction to the Creating and Maintaining Basic Part |
Intelligence |
Tool Bars Used in this Lesson |
Knowledge tool bar |
Geometrical Constraints Symbols and Definitions |
Dimensional Constraints and Definitions |
Analyze the part; develop and execute a plan; create the base feature; create the secondary feature; create Dress Up features; test the plan; additional notes. |
Summary |
Chapter Review |
Practice Exercises |
Login|Complaints|Blog|Games|Digital Media|Souls|Obituary|Contact Us|FAQ
CAN'T FIND WHAT YOU'RE LOOKING FOR? CLICK HERE!!! X
You must be logged in to add to WishlistX
This item is in your Wish ListX
This item is in your CollectionCATIA Version 5 Workbook, Release 10 & 11
X
This Item is in Your InventoryCATIA Version 5 Workbook, Release 10 & 11
X
You must be logged in to review the productsX
X
X
Add CATIA Version 5 Workbook, Release 10 & 11, , CATIA Version 5 Workbook, Release 10 & 11 to the inventory that you are selling on WonderClubX
X
Add CATIA Version 5 Workbook, Release 10 & 11, , CATIA Version 5 Workbook, Release 10 & 11 to your collection on WonderClub |