Joining of Advanced & Specialty Materials II: Proceedings of the 2nd International Conference Held 1-4 November 1999 in Cincinnati, Ohio Book

	Modular Design of CMC Structures by Reaction Bonding of SiC	3
	Joining Dissimilar Ceramic Materials	10
	A Joule-Heated Reaction-Bonded Joining Technique for Silicon Carbide	18
	Effect of Joint Microstructure and Composition on the Mechanical Behavior of Reaction Formed Joints in Silicon Carbide-Based Ceramics	25
	Development of Attachments for Positioning Sensor Lead Wires on SiC-Based Components	34
	Numerical Analysis of Microjoining Process in Electronic Packaging	40
	Active Metal Brazing: The Role of the Brazy Alloy	53
	Optical Hot Stage Microscopy for Brazing Investigations	58
	Microstructural Development of Transient Liquid Phase Bonds Between NiAl and Nickel-Bearing Substrates	64
	Oxidation Resistance of Transient Liquid Phase (TLP) Bonded Titanium Aluminides	72
	Formation of Interfacial Reaction Layer in Ceramics/Metal Joint Friction-Bonded with Intermediate Layer of Active Metal	79
	The Diffusion Bonding of Silicon Carbide and Boron Carbide Using Refractory Metals	88
	Processing Microlaminates of Titanium Aluminide Intermetallics Using Cold Roll Welding and Reaction Annealing	97
	Hot Isostatic Pressure Bonding a Thin Walled Niobium Alloy, Nuclear Space Power Heat Exchanger	103
	Single Crystal Bonding for Advanced Turbine Blade Designs	108
	Characterization and Modeling of Microstructure Development in Nickel-Base Superalloy Welds	117
	A Correlation of Martensite Layer Widths and M[subscript s] Temperature Equations for Austenitic/Farritic Dissimilar Alloy Welds	125
	Process Control of Electron Beam Welding of Thermostat Metal Strip	132
	Vacuum Laser Welding 0.005 Inch Thick Niobium Alloy Sheet	141
	Melting Efficiency during Plasma ARC Welding	147
	Humping Formation in High Current GTA Welding	151
	Recent Developments in Electron Beam Welding of Light Weight Materials	161
	Characterization of the Weldability of Gamma Titanium Aluminide Alloys as a Function of Iron Content	167
	A Combined Modeling and Experimental Study of Microstructural Evolution in Titanium Arc Welds	174
	A Microstructural Study of Postweld Heat Treated Gamma Titanium Aluminide	184
	Evaluation of Low Aluminum Fe-Al Alloys for Use as Weld Overlay Coatings in Reducing Environments	193
	Direct Observation of Phase Transformations in Austenitic Stainless Steel Welds Using In-Situ Spatially Resolved and Time-Resolved X-Ray Diffraction	200
	Solidification and Weldability of Free Machining Stainless Steel	209
	A Structural Efficiency Evaluation for Optimized Arc Welding Microstructures in an Ultra-High Strength Steel	217
	Fundamental Aspects of Hydrogen Trapping in Steel Weld Metal	227
	Thermodynamic of Silicate and Aluminate Oxide Melts Used in Welding and Metallurgical Processes	236
	Precipitation Behavior of Sigma Phase in Super Duplex Stainless Steel Weldment	243
	Differentiating the Role of P and S in Weld FZ and HAZ Hot Cracking in Austenitic Stainless Steels	251
	The Role of Composition and Microstructure in Weld HAZ Liquation Cracking of Nb-Bearing Type 347 Stainless Steel	260
	Creep Rupture Properties of High-Temperature Bainitic Steels after Weld Repair	268
	Advanced Methods for Hydrogen Determination in High Strength Steel	275
	Hydrogen Trapping in High Strength Steel Weld Metal	284