Failure Analysis: Techniques & Applications Proceedings of the First International Conference on Failure Analysis, 8-11 July 1991 Montreal, Queb Book

	Fractography Applied to Failure Analysis
	Subcritical Crack Growth Under Monotonic Loading in TI High Speed Steel	1
	Failure of Porous AISI 1018 P/M Steel Under Different Loading Conditions	13
	The Influence of Etch Pits on the Fatigue Life of Anodized Aluminum Alloys: Fractographic Examination	21
	Fracture Mechanics and Fracture Mechanisms
	Fracture Mechanics as an Important Tool in Failure Analysis	33
	Fatigue Striations and Failure Analysis	45
	Damage Tolerance Evaluation of an Airplane Flight Control System Component	51
	Edge Crack Stress Intensity Factors in Layered Ceramic-Metal Composites Due to Thermal Mismatch	59
	Recent Developments in the Buckling of Short Stringer Stiffened Shells Subject to Combined Loading	69
	A Strength Theory for Failure of Composite Laminates	75
	Corrosion and Erosion Failures
	Corrosion and Erosion Related Failures--An Overview and Typical Cases	83
	An Integrative Approach to Corrosion Failure Analysis	93
	Comparative Studies of Hydrogen-Induced Cracking Mode in Austenitic Stainless Steels and Pure Nickel	99
	Failure Analysis in Aircraft Industry
	Failure Analysis in the Aircraft Industry	105
	Failure Analysis of Aircraft Landing Gear Components	109
	Failure Analysis Case Studies in Aircraft Accident Investigation	119
	Failure Analysis of Gas Turbine Engine Fuel Nozzle Heat Shields	127
	Damage Analysis of Aircraft Gas Turbine Engines	137
	Analysis of a Failed UH-1N Helicopter Main Rotor Blade Grip	141
	Failure Analysis--Case Histories
	Case Histories of Failure Analysis	145
	Four Interesting Bearing Failures	151
	Failure Analysis of an Automobile Weldment	155
	Fracture of a Core Component in a Nuclear Reactor	159
	Failure Analysis of a Set of 1CrMoV Studs from a 250MW Steam Turbine After 50,000 Hours of Service	167
	Metallurgical Failure Analysis in Microelectronic Components	177
	Failure Analysis of Computer Data Storage Disc Drive Systems	185
	Failure Analysis Prevention and Testing
	Failure Analysis, Prevention, and Testing	191
	Assessment of Integrity of Structures by Elgenfrequencies	199
	Failure Diagnostics--Application of Expert Systems	207
	Teaching Failure Analysis to Undergraduates	211
	The Wright Method for Determination of Lot Homogeneity of Fastener Samples Passing Chemical Analysis	215
	Comparison of Manufacturer's Chemical Test Data to Laboratory Chemical Analysis by the Wright Method for Determining Lot Homogeneity	227
	CF5 Full Scale Fatigue Test--Preliminary Results	237
	Legal Aspects of Failure Analysis
	Failure Analysis in the Forensic Domain	249
	Defect or Flaw--Legal Implications	253
	Failure Analysis of Nonmetallics and Bio-Materials
	Failure Analysis of Glass and Ceramics	263
	The Application of Fractography and Other Examination Methods to the Failure Analysis of Polymeric Components	269
	Damage Assessment in a Kevlar/Polyester Composite Component	279
	Methods of Creep Rate and Stress Rupture Prediction for Polymeric Materials	289
	Fatigue Deformation and Fractographic Analysis of Surgical Implants and Implant Materials	299
	Characterization of Fatigue-Fractured Dental Cements	311